FERRO SILICON : (Picture ferro silicon)

Ferro Silicon is a universal “heat-blocker” used in the production of carbon and stainless steels. This additive is used with other ferro alloys in the deoxidising process of steel, as well as in the production of silicon itself. It is also used in the production of cast iron, as it can accelerate graphitisation. Ferro Silicon replaces the need for ferro manganese, spiegeleisen and calcium silicides in the manufacturing process.

Si Al C P S

 

FeSi 75 % 75 % min 1.50 % max 0.15 % max 0.03% max 0.02 % max

FERRO CHROME : (picture ferro chrome)

Ferro-chrome is added to steel to impart properties of hardness, strength and making it stainless. High Carbon Ferro Chrome is most commonly used in specialist applications such as engineering steels.  It is also a low cost alternative to metallic chrome for uses in super alloys and other special melting applications.

 

Cr C Si P S
FeCr HC-Charge CR 55-60 % 6-8 % 3.0 % max 0.03 % max 0.04 % max

FERRO PHOSPHOR : (picture ferro phosphor)

Ferro phosphorus is used mainly as the additives in the foundry industry to improve the floatability of foundry iron, thus improving the quality of the castings. Phosphorus                     content can increase the wearing resistance and improve the cutability in the castings. Ferro phosphorus also used as the additive in the steel production, which can improve the             corrosion resistivity in certain steel products.

P Si C S Cu V
FeP 23-28 % 1-2 % 0.1 % max 0.01 % max 0.5 % max 0.5 % max
SIZE 10-50 mm / 10-100 mm
PACKING 1 mt big-bag

FERRO TITANIUM : (picture ferro titanium)

Ferro Titanium is used by stainless steel makers as a stabiliser to prevent chromium carbide forming at grain boundaries and in the production of low carbon steels for sheet  production. Main applications for Ferro Titanium include: – Cleansing Agent: used for deoxidizing, desulfurization and denitrification. – Grain Refiner:  improve malleability in          carbon steels, thereby increasing its versatility.

Ti 40 / 70 % min
Al 0.5 / 4.5 % max
V 3 % max
N 0.2 / 0.5 % max
S 0.03 % max
P 0.04 % max
C 0.20 % max
Mn 1,5 % max
SIZE 10-50 mm / 10-100 mm
PACKING 1 mt big-bag / steel drums

FERRO MOLYBDENUM : (picture ferro molybdenum)

Ferro Molybdenum has hardening properties that makes steel extremely strong and at the same time weldable. Additionally, the adding of Ferro Molybdenum to an alloy can increase corrosion resistance. Ferro Molybdenum is used in stainless, heat-resisting and tool steels.

Mo 60 / 65 % min
Cu 0.5 % max
Si 1,5 % max
S 0.1 % max
Cu 0.1 % max
P 0.05 % max
SIZE 10-50 mm / 10-100 mm
PACKING 1 mt big-bag / steel drums