Description
SG-1018 has been specially developed for the production of cold hardening cores and moulds. The release agent film is good adhesive, has very good gliding properties and is highly resistant so that repeated ejections are possible even under extremely unfavourable conditions SG-1018 contains silicones.
Range of Application
SG-1018 demonstrates excellent properties in all cold-setting processes e.g.:
- COLD-BOX
- CO2
- ECOLOTEC
- BETA-SET
- RED-SET
Technical Data
| Appearance: | colourless |
| Odour: | typical |
| Viscosity: | < 100cP |
| Density (20°C): | 0,75g/cm3 |
| Flashpoint: | <0°C |
| Hazard Marks: | highly flammable |
| VbF: | AI |
Application
SG-1018 is used undiluted. The release agent should be applicated by hand or with spray facility. The whole surface of coreboxes and models should be thin moistened. Avoid unwetted spots.
Packing
20kg can and 150kg drum
Spray
We deliver cleaner for all PUR processes.
- Mould cleaner
cleaner, water-miscible, for stubborn dirt
cleaner, favourable labelling
cleaner for bonding resin